Skyland Metal & Alloys Inc.
Skyland Metal & Alloys Inc.
Charni Road, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Inconel

INCONEL® nickel-chromium alloy 625 (UNS N06625/W.Nr. 2.4856) is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C). Composition is shown in Table 1. Strength of INCONEL alloy 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix; thus precipitation hardening treatments are not required. This combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high-temperature effects such as oxidation and carburization. It is used as wire rope for mooring cables, propeller blades for motor patrol gunboats, submarine auxiliary propulsion motors, submarine quickdisconnect fittings, exhaust ducts for Navy utility boats, sheathing for undersea communication cables, submarine transducer controls, and steam-line bellows. Potential applications are springs, seals, bellows for submerged controls, electrical cable connectors, fasteners, flexure devices, and oceanographic instrument components. High tensile, creep, and rupture strength; outstanding fatigue and thermal-fatigue strength; oxidation resistance; and excellent weldability and brazeability are the properties of INCONEL alloy 625 that make it interesting to the aerospace field. It is being used in such applications as aircraft ducting systems, engine exhaust systems, thrust-reverser systems, resistance welded honeycomb structures for housing engine controls, fuel and hydraulic line tubing, spray bars, bellows, turbine shroud rings, and heat-exchanger tubing in environmental control systems. It is also suitable for combustion system transition liners, turbine seals, compressor vanes, and thrust-chamber tubing for rocket The outstanding and versatile corrosion resistance of INCONEL alloy 625 under a wide range of temperatures and pressures is a primary reason for its wide acceptance in the chemical processing field. The material can be selected because of its high strength, excellent uniform corrosion resistance, resistance to stress cracking and excellent pitting resistance in 500°-600°F (260-316°C) water. Alloy 625 is also being considered in advanced reactor concepts because of its high allowable design strength at elevated temperatures, especially between 1200°-1400°F (649-760°C).

Inconel Round Bar

Inconel Round Bar
  • Inconel Round Bar
  • Inconel Round Bar
Get Best Quote
Approx. Price: Rs 950 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1 Kilogram
MaterialInconel Alloy
Size8mm - 200mm
Usage/ApplicationConstruction
Single Piece Length3 meter, 6 meter
Grade625 / 600 / 601 / 800 / 825
ShapeRound
Material GradeInconel 625 / 600 / 601 / 800 / 825
TypeBar
Size/Diameter>4 inch, >4 inch

With desire to cement our reputation in the market, we are engaged in offering an excellent range of Inconel Rods, Bars & Wire. Keeping in mind current market development, these products are manufactured by our vendors' qualified professionals employing premium quality raw-material and modernize tools. Apart from this, our vendors' quality experts perform a series of test on the entire range ensuring its flawlessness.

 

Features:

 

  • Industry approved design
  • Corrosion resistance
  • High durability

Specifications:

  • Grades: 600, 601, 625, 800, 825
  • Sizes: 1mm to 200mm diameter
  • Standard: ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Alloy 625 Seamless Pipe

Alloy 625 Seamless Pipe
  • Alloy 625 Seamless Pipe
Get Best Quote
Approx. Price: Rs 1,200 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1 Kilogram
MaterialSB-444 Gr.2 N06625
Product TypeSeamless Pipe
ShapeRound
Unit Length6 m
Size/Diameter3 inch, >4 inch, 1/2 inch, 2 inch, 1 inch, 4 inch
Single Piece Length6 meter, 3 meter
ApplicationUtilities Water, Food Products, Drinking Water, Gas Handling, Chemical Handling
Material GradeInconel 625

Our cordial business relations with the reputed vendors empower us to provide an optimum quality range of Inconel Pipes & Tubes. These products are precisely manufactured using topmost grade raw-material and the latest technology in tandem with set industrial norms at vendors' end. According to the specific clients' requirements, these products are made available in various specifications. Clients can avail the entire range from us at affordable price.

Features:

  • Compact size
  • Dimensional accuracy
  • Optimum finish
Specifications:
  • Grades: 600, 601, 625, 800, 825
  • Types: Seamless / Erw / Welded/ Fabricated
  • Range: 15 NB up to 600 NB in SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS
  • Form: Round, Square, Rectangular, Hydraulic etc
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel Flanges

Inconel Flanges
  • Inconel Flanges
Get Best Quote
Approx. Price: Rs 250 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSKYLAND
Material StandardASTM A182
ShapeFlange Type
GradeSB564 N06600
Steel GradeInconel 600 / inconel 625 / Inconel 800
Size1/2" - 36"
OriginINDIAN
TypeWeld neck flanges, Threaded flanges, Blind flanges
MaterialINCONEL
ConditionNew

Owing to the expertise of our professionals, we have emerged as the foremost organization of an excellent quality array of Inconel Flanges. Our offered flanges are highly demanded in the market for their compact design, corrosion-resistance and durability. These flanges are manufactured with the help of fine grade raw-material and progressive technology in adherence to set industry norms at vendors' end. Moreover, flanges offered by us can also be availed in various sizes and shapes as per different requirements of our precious clients.

 

Features:

  • Precisely designed
  • Easy to install
  • Resistant against corrosion

 

Specifications:
  • Grades: 600, 601, 625, 800, 825 ;
  • Size: 1/2 inch - 48 inch (15mm - 1200mm)
  • Types: Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring Joint
  • Standard: ANSI/ASME B16.5, ANSI B16.47 API, DIN, JIS, BS
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel Pipe Fittings

Inconel Pipe Fittings
  • Inconel Pipe Fittings
Get Best Quote
Approx. Price: Rs 120 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSKYLAND
Thread SizeBSP/NPT
TypeElbow, Tee, Reducer
GradeASTM B366
ConnectionMale, Female, Flange
MaterialInconel, Inconel Alloy
Size1/2 inch, 3/4 inch, 1 inch, 3 inch, 2 inch
ApplicationPneumatic Connections, Gas Pipe, Structure Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe
ConditionNew

Inconel Butt weld fittings are available in various profiles like Inconel 600, Inconel 601, Inconel 617, Inconel 625, Inconel 718, Inconel X-750, Inconel 800, Incoloy 800H, Incoloy 800HT and Inconel 825. Engineered using one of the toughest alloys, these inconel buttweld fittings have excellent mechanical properties, low gas content and low vapor- pressure along with high thermo-electrical conductivity. Along with this, the suitable chemical composition make these buttweld inconel fittings highly resistant to corrosive environment.

Specifications:

  • Grades: 600, 601, 625, 800, 825
  • Range: 15 NB UP TO 600 NB IN SCH 5S, 10S,10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS
  • Types: Elbow 90 Deg, Elbow 45 Deg, Elbow 180 Deg, long/short radius elbows, equal/unequal tees, concentric/eccentric reducers, caps, crosses, short/long neck stub-ends

Buttweld Fittings

• 90° Long Radius Elbow

• 90° Short Radius Elbow

• 45° Long Radius Elbow

• 45° Short Radius Elbow

• 180° Long Radius Elbow

• 180° Short Radius Elbow

• 1D Elbows

• 1.5D Elbows

• 3D Elbows

• 5D Elbows

• Seamless Buttwelding 45° and 90° Elbows

• Seamless Buttwelding 180° Returns

• Straight Tees and Crosses

• Equal Tee

• Reducing Tee

• Equal Cross

• Reducing Cross

• Reducers

• Concentric and Eccentric Reducers

• Stub End

• Lap Joint Stub End

• Pipe Caps

• End Cap

• Collar

• Swedge Nipples

• Pipe Nipples

• Piggable Bend

• Lateral

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel Socket Weld Fittings

Inconel Socket Weld Fittings
  • Inconel Socket Weld Fittings
Get Best Quote
Approx. Price: Rs 150 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Thread SizeBSP/NPT
BrandSKYLAND
TypeReducer, Tee, Elbow
GradeASTM B366 Inconel 625
ConnectionMale, Female, Flange
Thickness (mm)Sch5 - SchXXs
Elbow Bend Angle (degree)45Deg , 90Deg
MaterialInconel, Inconel Alloy
Size1/2 inch, 3/4 inch, 2 inch, 3 inch, 1 inch, Greater Than 3inch

Skyland Metal And Alloys Inc. is one of the leader manufacturers, Supplier and exporters of high quality Inconel Forged Fittings and Socket Weld fittings.

Specifications:

  • Grades: 600, 601, 625, 800, 825 ;
  • Standard: ASTM / ASME SB 564

Types:

  • Elbow - 90 Deg. & 45 Deg
  • Tee - Equal & Reducing
  • Union, Cross, Coupling - Full & Half
  • Forged Fittings Type Threaded Fittings
  • 90° Elbow
  • 45° Elbow
  • Tee
  • Cross
  • Full Coupling
  • Half Coupling
  • Pipe Cap
  • Hexa Head Bushing
  • Hex Head Plug
  • Street Elbow
  • Bull Plug
  • Boss
  • Swage Nipple
  • Pipe Nipple
  • Adapter
  • Union ( Male / Female)
  • Branch Outlet
  • 90° Elbow Outlet
  • 45° Lateral Tee
  • Lateral Outlet
  • Nipple Branch Outlet
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel 625 Fasteners

Inconel 625 Fasteners
  • Inconel 625 Fasteners
Get Best Quote
Approx. Price: Rs 8.5 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSkyland
SizeM2 - M200
Quantity Per Pack10
GradeInconel 600 / 625 / 800
ConditionNew
Material GradeInconel 625
MaterialInconel

SKYLAND METAL AND ALLOYS INC. manufactures and Exports stainless and super alloy bolting which includes:

Hex bolt, Hex Nuts, Stud bolts, Threaded Bars, Washers, Hex plugs etc. as per standards ASTM, ASME, DIN and UNI. These products application industries are oil and Gas, Chemical, Petrochemical, Power and Energy and Marine industries(On Shore/ Offshore).
These Material are being supplied to Domestic Market and Overseas Countries Like: UAE, Qatar, Oman, Saudi Arabia, Kuwait, Baharin, Iran, Italy, France, U.k., South-africa, Australia, Panama, U.S.A. Etc.

Our Most Common Material in stock as well as in production are of Stainless Steel Grade 304, 316, 321, 347, 310, 410, A453 660A/B/C, AISI 904L, Alloy 20, Duplex UNS S32750 & UNS S32760, Inconel 600, Inconel 625, Inconel 800, Inconel 825, Inconel 925, Hastelloy C-276, Hastelloy C-22, Titanium Gr 2 & Gr 5 & Aluminium Bronze. Beside this we also supplies all kind of Raw Material in Stainless Steel, Duplex steel and exotic materials in the form of Pipes, Plates, Round Bar, Wires, Electrodes, Flanges and Pipe Fittings.

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel 625 Seamless Pipes

Inconel 625 Seamless Pipes
  • Inconel 625 Seamless Pipes
Get Best Quote
Approx. Price: Rs 500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity5 Kilogram
BrandSKYLAND
Size/Diameter1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch, >4 inch,>4 inch
Single Piece Length3 meter, 6 meter
ApplicationDrinking Water
MaterialInconel 625
Material Grade625
ShapeRound
Nominal Size1.50'', 2'', 1'''',1.50'''',2'''',1/2'''',3/4'''', 1'', 1/2'', 3/4''
Length3m, 6m

Skyland Metal And Alloys Inc. is a well known manufacturer and supplier of Inconel 625 Seamless Pipe ASTM B444 UNS N06625 in INDIA. Inconel 625 Seamless Pipe ASTM B444 UNS N06625 is usually used in industries such as construction, oil extraction , medicine food ,paper , machinery, chemicals, food containers and others.The INCONEL 625 pipes are manufactured to sustain very high pressure and Product warranty.

We Skyland Metal And Alloys Inc.manufacture,Import and are Stocking distributor of Inconel® tubing for the aerospace, defense, petro-chemical, nuclear & medical industries. Small quantities to mill runs, expediting services available, standard & custom shapes & forms.
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel Fastener

Inconel Fastener
  • Inconel Fastener
Get Best Quote
Approx. Price: Rs 15 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSKYLAND
SizeM8 - M200
Quantity Per Pack10
TypeFastener, Fastening Components
Grade600 / 601 / 825
Thread TypeYes
MaterialInconel Alloy
ConditionNew

A Ni-Cr alloy known for its corrosion resistance and high temperature stability.

Inconel® bolts, like Inconel 600, 601,625,686,718 & 725 bolts, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel bolts enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel bolts. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.

Because Inconel bolts offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.

The most commonly used grades of Inconel bolts are Inconel 625 and Inconel 718. For more indepth information on these specific grades, visit our Inconel 625 or Inconel 718 bolt pages, or contact one of our engineering experts.
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel 600 Seamless Pipe

Inconel 600 Seamless Pipe
  • Inconel 600 Seamless Pipe
Get Best Quote
Approx. Price: Rs 350 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity5 Kilogram
Single Piece Length3 meter, 6 meter
ApplicationDrinking Water
MaterialInconel
Material GradeASTM B 167 UNS NO 6601
Product TypeSeamless Pipe
ShapeRound
Nominal Size1'', 3/4'', 1.50'', 2'', 1/2'', Greater Than 2 inch
Length3m, 6m

Inconel Pipes

Inconel pipes are available in special alloys like Inconel 600, Inconel 601, Inconel 617, Inconel 625, Inconel 718, Inconel X-750, Inconel 800, Incoloy 800H, Incoloy 800HT and Inconel 825. These premium quality inconel pipes, threaded pipes, inconel tubes are used widely in critical applications in industries like oil & gas, aviation, aerospace, petrochemical, natural gas, etc. Our inconel pipes and tubes are available in various dimensional specifications such as cross section and outer diameter. In addition, these threaded pipes and tubes are also offered in various threading specifications.

Range
  • 15 NB UP TO 600 NB IN SCH 5S, 10S,10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS

Type
  • Seamless / Erw / Welded/ Fabricated
Form
  • Round, Square, Rectangular, Hydraulic Etc.

Length
  • Single Random, Double Random & Cut Length

End
  • Plain End, Beveled End, Threaded

Value Added Services
  • Hot Dipped Galvanizing
  • Epoxy & Fbe Coating
  • Electro Polish
  • Draw & Expansion
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel 625 Tee

Inconel 625 Tee
  • Inconel 625 Tee
Get Best Quote
Approx. Price: Rs 100 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSkyland metal
MaterialInconel
ApplicationHydraulic Pipe
Size3 inch
ConditionNew
TypeTee
GradeInconel 625

The Inconel Tee Fittings are T-shaped with two outlets at 90°, to connect pipes / tubes to the main line. We Skyland Metal and Alloys INC. offer these fittings for use in industrial tubings to merge or divide fluids. These tee fittings are precisely engineered to close tolerances and appropriate dimensions and moreover these Tee Inconel fittings do not require special tubing preparation before any applications. We offer these fittings made of various materials, sizes and finishes.
Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel 625 Round Bars

Inconel 625 Round Bars
  • Inconel 625 Round Bars
Get Best Quote
Approx. Price: Rs 1,200 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1 Kilogram
MaterialInconel Alloy
Single Piece Length6 meter, 3 meter
ShapeRound
Material GradeInconel 600 / 625 / 601
TypeBar
FormSolid
Place Of OriginINDIA
UsageManufacturing, Household Repair, Construction
Bar TypeSteel Bar, Nickel Bar
ConditionNew
Grades600 / 601 / 625
Unit Length3 m, 6 m
BrandSKYLAND
Size5mm Dia - 200mm Dia

Inconel alloys are oxidation and corrosion resistant materials well suited for service in extreme environments. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally-induced crystal vacancies. Inconel's high temperature strength is developed by solid solution strengthening or precipitation strengthening, depending on the alloy.
Buy ASTM B637 Inconel 625 Rod available in diversity of sizes in Big stock, we deliver ASTM B637Inconel 625 Rod with Exceptional sizes & Quality.
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel Wire

Inconel Wire
  • Inconel Wire
Get Best Quote
Approx. Price: Rs 1,000 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1 Kilogram
Length0.12mm dia - 4mm dia
ColorSilver
BrandSKYLAND
MaterialInconel Steel
ConditionNew
TypeFiller Wire, Rolling Wire, Nickel Wire
Thickness0.12-4mm
Material Grade600,625
Single Piece Length3 meter, 6 meter, 18 meter, 36 meter, >36 meter
Grade625

Inconel® 625 Wire is a Nickel-Chromium-Iron alloy with good corrosion resistance, oxidation resistance, and high strength at high temperatures. Inconel® 625 is highly resistant to chloride-ion stress-corrosion cracking due to the high nickel content. Age-hardening treatments are not required, as Inconel® 625 is hardened and strengthened through cold work only. Inconel® 625 can operate from cryogenic temperatures to 700°F (370°C).Industries Supplied

Chemical Processing, Thermal Processing, Nuclear, and Aerospace.

Nominal Composition
  • Cr: 14.0 - 17.0
  • Fe: 6.0 - 10.0
  • Mn: 1.0 max
  • Ni: 72 min
  • Cu: 0.5 max
  • Si: 0.5 max
  • C: 0.15 max
  • S: 0.015 max
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel 800 Plate

Inconel 800 Plate
  • Inconel 800 Plate
Get Best Quote
Approx. Price: Rs 2,000 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1 Kilogram
SizeAs per customers requirement
BrandSKYLAND
GradeInconel 800
MaterialInconel Alloy 800
Steel GradeInconel 800
ShapeSquare, Rectangle
ConditionNew
Plate TypeInconel Plate, Nickel Plate
TypeInconel 800 Plate

Alloy 800 is a combination of nickel and chromium alloy that has excellent tensile strength and resistance to oxidation as well as carburzation properties. This alloy is extremely functional as it maintains a stable structure, even when exposed to high temperature. Alloy 800 is extremely resistant to corrosion, even in acidic environment. For high temperature applications requiring optimum rupture and creep properties, Alloys 800H and 800HT are used.

 

Inconel 800 Applications: Inconel Alloy 800 is used for process piping, heat exchangers, heating-element sheathing, carburizing equipment, and nuclear steam-generator tubing.


Inconel 800 Specifications: Inconel Alloy 800, Alloy 800, UNS N08800

 

Inconel 800 Available Forms: 800 Nickel Alloy Sheet, 800 Nickel Alloy Plate, 800 Nickel Alloy Bar

 

Inconel 800, Incoloy 800 Sheet, Plate

Inconel 800, Incoloy 800: AMS 5871, ASTM B409, AMS 5877, BS 3072NA15, BS 3073NA15, DIN 17460, EN 10028-7, EN 10095

Stock Size: Thickness: 0.025"~3.00"

Width & Length: 36" X 120" or 48" X 144"

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel Plate

Inconel Plate
  • Inconel Plate
Get Best Quote
Approx. Price: Rs 1,900 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1 Kilogram
Material GradeInconel 800H
Plate TypeInconel Plate, Nickel Plate, Thin sheet
Steel GradeInconel 800H
ConditionNew
BrandSKYLAND
SizeAs per customers requirement
MaterialInconel Alloy
Grade600/625/800/800H
ShapeSquare, Rectangle

Alloy 800H is a combination of nickel and chromium alloy that has excellent tensile strength and resistance to oxidation as well as carburzation properties. This alloy is extremely functional as it maintains a stable structure, even when exposed to high temperature. Alloy 800 is extremely resistant to corrosion, even in acidic environment. For high temperature applications requiring optimum rupture and creep properties, Alloys 800H and 800HT are used.

 

Inconel 800H Applications: Inconel Alloy 800H is used for process piping, heat exchangers, heating-element sheathing, carburizing equipment, and nuclear steam-generator tubing.


Inconel 800H Specifications: Inconel Alloy 800H, Alloy 800, UNS N08800

 

Inconel 800H Available Forms: 800 Nickel Alloy Sheet, 800 Nickel Alloy Plate, 800 Nickel Alloy Bar

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel Sheet

Inconel Sheet
  • Inconel Sheet
Get Best Quote
Approx. Price: Rs 650 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1 Kilogram
Grade600 / 601 / 625
StandardASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443
SurfaceGalvanised
TypeSheet and Plate
BrandSKYLAND
MaterialINCONEL
Material GradeINCONEL 600 / INCONEL 601 / INCONEL 625
ShapeRectangle
ConditionNew

By keeping in mind the track of advanced market development, we Skyland Metal And Alloys Inc. are engaged in offering an exclusive range of Inconel Sheet & Plate. Procured from some famed vendors of the market, these products are made available in numerous specifications that are designed using latest technology at vendors' end. Apart from this, our clients can avail these products from us at market leading prices. These products are broadly acknowledged among our clients for their optimum quality, fine finish and durability.

Features:

  • Sturdiness
  • Easy installation
  • Precise dimensions
Specifications:
  • Grades: 600, 601, 625, 800, 825
  • Standard: ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443
Value Added Service:
  • Heat treatment
  • Annealed & pickling
  • Rolling, cutting, bending, forging, minor fabrication, etc
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel 625 Socket Weld Threaded Tee Fittings

Inconel 625 Socket Weld Threaded Tee Fittings
  • Inconel 625 Socket Weld Threaded Tee Fittings
Get Best Quote
Approx. Price: Rs 120 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
ColorSilver
BrandSKYLAND
Size3/4 inch, 2 inch, Greater Than 3inch, 1/2 inch, 1 inch, 3 inch
ApplicationStructure Pipe
MaterialInconel Alloy, Inconel
TypeTee
GradeASTM B366 Inconel 625
ConnectionMale, Female, Flange

As an acclaimed enterprise of the industry, Skyland Metal and Alloys Inc. is involved in offering a vast array of Inconel Forged Socket Weld Pipe Fittings as a manufacturer, exporter, stockist and supplier to our domestic and global clients. With respect to different grades, we offer these Fittings in different types such as Inconel Forged Socket weld & Threaded Fittings, Inconel Forged Elbows, Inconel Forged Equal & Unequal Tee

ASTM B564 Inconel 718 Forged Elbow, 800 Incoloy Full Coupling, Incoloy 825 Threaded Pipe Fittings, ASME / ANSI B16.11 Socket Weld Bushing Suppliers.

Inconel Forged Equal & Unequal Cross, Inconel Forged Couplings / Sockets, Inconel Forged Unions, Inconel Nipple (pipe, barrel, swage), Inconel Bushing, and Inconel Plug. With respect to national and international quality of raw materials, we also offer these Inconel Socket Weld Pipe Fittings in customized sizes and thicknesses as per specific demands by our esteemed clients at market leading prices.

 

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Inconel Bars

Inconel Bars
  • Inconel Bars
Get Best Quote
Approx. Price: Rs 1,000 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1 Kilogram
MaterialInconel Alloy
Usage/ApplicationConstruction
Single Piece Length3 meter, 6 meter
ShapeRound
Material GradeASME B637 UNS N07718
TypeBar
Test CertificateWill Be Provided
Unit Length6 m, 3 m
Bar TypeSteel Bar, Nickel Bar
ConditionNew

We SKYLAND METAL AND ALLOYS INC. is one of the largest exporter , manufacturer and supplier of ASME B637 UNS N07718 (Inconel 718) Round bars in India. We offer different types of These bars sich as Bright bars , Hez bars , Flat bars , Bilets bars & Forged Bars. Inconel 718 Shows some tremendously tensile , Creep-Rupture and high yiled features at elevated temperatures . Inconel 718 Bars are apt in the field of Gas turbing & Cyrogenoc storage tanks components, thrust reversers & Tocket Motors , Jet Engines , Pump bodies , Nuclear Fuel element spares , Hot ectrusion tooling & so on.
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested
X

Explore more products



Reach Us
Piyush Bhansali (Director)
185, Black Stone Building, 4th Floor, Off No. 7 Dr. M M Marg
Charni Road, Mumbai- 400004, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS