Skyland Metal & Alloys Inc.

• A/SA-106 – Grades B & C
• A/SA-53 Seamless – Grade B

• Carbon Steel Butt Weld Fittings: A/SA-234 WPB * WPC
• Carbon Steel Forged Fittings: A/SA-105
• Carbon Steel Flanges: A/SA 105

• API5L Seamless – Grades B (X42, X52, X60, X65 and above)

• High Yield Butt Weld Fittings: A- 860 or MSS SP75
• WPHY42 (Y52, Y56, Y60, Y65)
• High Yield Flanges: A-694 (F42, F52, F56, F60, F-65)

Carbon Steel A105 WNRF Flanges Normalised & Fully Killed Nace MR 0175

We SKYLAND METAL AND ALLOYS INC. Being a client-centric organization are engaged in offering a distinct collection of Carbon Steel Flanges.

Other Details:

• Weldneck Flanges
• Blind Flanges
• Spectacle Blind Flanges
• Slip On Flanges
• Orifice Flanges
• High Hub Flanges
• Socket weld Flanges
• Flat Flanges
• Loose Flanges
• Square Flanges
• Threaded Flanges
• Ring Type Joint Flanges
• SORF Flanges
• BLRF Flanges
• Groove & Tongue Flanges
• Expander Flanges
• ASME B16.5 Flange
• ASME B16.47 Flange
• ASME B16.36 Flange
• DIN Flange PN6-PN40
• JIS B2220/B2291 Flange
• BS 4504 Flanges
• BS 10 Flanges
• Pr EN 1092-1 Flanges

FLANGES:

Weldneck | Slipon | Blind | Threaded | Flat Face | Spectacle Blind | Socketweld

Standards: ASME / ANSI / DIN / JIS / BS / GB

Dimensions: B16.5 / B16.47 – A105 / A182 / A240

BUTTWELD & FORGED FITTINGS:

ELBOW | TEE | REDUCER | OLET | CROSS | STUB END | COUPLING | UNION

Standards: ASME / ASTM / API5L / DIN / GOST / JIS

Dimensions: B16.9 / B16.28 – A403 / A234 / A182

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

The carbon steel plates come with mill certification in accordance with EN10204 3.1 or EN10204 3.2. Our plates are fully traceable, usually with hard stamping and we welcome any third party or customer inspection if required which can be arranged with the client.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

SA-675 Grade 60 Round Bars are hot-wrought special quality carbon steel bars and bar size shapes produced to mechanical property requirements and intended for general constructional applications.
The bars are available in nine strength grades designated 45, 50, 55, 60, 65, 70, 75, 80, and 90 [310, 345, 380, 415, 450, 485, 515, 550, and 620] corresponding to the minimum ultimate tensile strength in ksi [MPa]. The chemical composition is selected by the manufacturer to develop the required mechanical properties.
Hot-wrought special quality carbon steel bars subject to mechanical property requirements are hot wrought in straight lengths only. Sections and sizes available are covered in Specification A 29/A 29M.
Some applications may require one or more of the available designations shown under Supplementary Requirements.

Note 1—Merchant-quality hot-wrought carbon steel bars subject to mechanical property requirements are covered in Specification A 663/A 663M.
The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not equivalents, therefore each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

This guide covers standard specification for hot-wrought special quality carbon steel bars and bar size shapes produced to mechanical property requirements and intended for general constructional applications. Heat analysis shall be performed wherein the material shall conform to the required chemical composition for phosphorus, sulfur, copper, and lead. The steel shall meet the required tensile properties such as tensile strength, yield strength, and elongation. The test specimen shall undergo mechanical tests such as tension test and bend test.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Our reputation in the market is largely attributable to our precision-designed Carbon Steel Pipe Fittings from our extensive collection of products. These fittings are manufactured using excellent quality raw-material and the latest technology by our vendors'''' skilled professionals. These fittings are used in marine applications, nuclear power and fossil, fuel power plants, transportation, petroleum plants, construction industry. In order to ensure quality, provided fittings are stringently tested on various parameters by our vendors'''' experts. Apart from this, remarkable quality and sturdy structure increase the demand of our offered range in the market.

Features:

• Rugged construction
• Rust resistance
• Easy installation

• Size Available: ½” NB to 24 “NB in SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160
• XXS Such as 90° Elbow ( Long Radius / Short Radius )
• Equal Tee, 45° Elbow ( Long Radius / Short Radius)
• Eccentric Reducer, Stub End (short/long), Coupling (half/full)

Additional Information:

• Item Code: 7307
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: JNPT
• Production Capacity: 100000
• Delivery Time: 2 WEEKS
• Packaging Details: WOODEN BOX

• 90° Short Radius Elbow

• 45° Long Radius Elbow

• 45° Short Radius Elbow

• 180° Long Radius Elbow

• 180° Short Radius Elbow

• 1D Elbows

• 1.5D Elbows

• 3D Elbows

• 5D Elbows

• Seamless Buttwelding 45° and 90° Elbows

• Seamless Buttwelding 180° Returns

• Straight Tees and Crosses

• Equal Tee

• Reducing Tee

• Equal Cross

• Reducing Cross

• Reducers

• Concentric and Eccentric Reducers

• Stub End

• Lap Joint Stub End

• Pipe Caps

• End Cap

• Collar

• Swedge Nipples

• Pipe Nipples

• Piggable Bend

• Lateral

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

We are a maker, merchant, stockist, provider and exporter of ASTM GR A672 CC65 EFW Pipes that are built by giving uncommon concentrate to go up against testing conditions, giving elite at sensible cost. Our ASTM A672 CC65 Carbon Steel Pipes are consistent to ASTM A672 review, consequently we offer A672 CC65 Electrical Fusion Welded pipes inside the ostensible pipe estimate with an external distance across of 16 inches or more prominent, appropriate for high weight applications, as in warm exchangers for private buildings, working at direct temperatures.

We keep a tab on advertise patterns and requests, to concoct new, practical and prudent items fit for experiencing customization. We have manufactured a thorough arrangement of value items over the traverse of 25 years. Our items are completely ensured and 100% strong.

• ASTM A672 CC65 EFW Pipes Specifications :
• CS A672 CC65 EFW Pipes Applications Industry
• CS EFW Pipe Main Export Countries
• Other Types Of ASTM A672 CC65 CS EFW Pipes

We SKYLAND METAL  AND ALLOYS INC. are a manufacturer, trader, stockist, supplier and exporter of A860 WPHY 42 Pipe Fittings that are compliant to ASTM A860 specification, guidelines for butt weld pipe fittings made from Wrought High strength but low alloyed Stainless Steel, Seamless and EFW in nature. Our A860 WPHY 42 Pipe Fittings are a pre-requisite for the conveyance of gas and oil in the high-pressure gas and oil transportation systems.

Our ASTM A860 WPHY 42 Pipe Fittings are available as Pipe Couplings, Caps, Elbows, Reducers Unions, Ferrule, Nipple, Tees, Stub Ends, Crosses, Bends, etc. that are manufactured in many thicknesses and grade specifications, and in end connections and sizes.

Our completely certified products have been designed to meet all the market demands and requirements.

• ASTM A860 WPHY GR 42 Pipe Fittings Specifications :
• ASTM A860 Applications Industry
• A860 WPHY 42 Pipe Fittings Main Export Countries
• Other Types Of CS Buttweld Pipe Fittings
• Countries We Export

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

We SKYLAND METAL AND ALLOYS INC. Are Manufacturer, Supplier, EXPORTERS & Stockists Of Carbon Steel ASTM A53 Grade B Seamless Pipes NACE MR 0175.


ASTM A53 Grade B Seamless Pipes NACE MR 0175 is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit higher temperatures and pressure levels.

• Grades B and C
• NPS ¼” to 36” diameter
• Schedules 10 through 160, STD, XH and XXH
• Schedules 20 through XXH
• Wall Thickness beyond XXH, including:
  – Up to 4” wall in 20” through 24” OD
  – Up to 3” wall in 10” through 18” OD
  – Up to 2” wall in 4” through 8” OD

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

We SKYLAND METAL AND ALLOYS INC. feel immensely pleased to offer an exclusive gamut of Carbon Steel Pipes at cost effective price. Our offered products are manufactured utilizing optimum quality raw-material and advanced technology by our vendors' skilled professionals. In order to ensure quality, these products are rigorously tested on various parameters. Apart from this, we provide the entire range in various sizes and designs, as per the requirement of our prestigious clients.

Features:

• Compact design
• Easy installation
• Resistant against corrosion

• ASTM A 106 GR. B
• ASTM A 53 GR. B
• API 5L GR. B
• IS 1978 YST 210
• IS 1978 YST 240
• DIN 17175 ST 35.8
• DIN 17175 ST 45.8
• DIN 17175 ST 52.0O
• Used In Marine applications, Nuclear power and fossil
• fuel power plants, Transportation
• Petroleum plants ,Construction Industry
• Size/Range: 6mm to 200mm
• Thickness: 0.5 mm to 12 mm
• Length: 0.5 mm to 12 mm
• Thickness: 0.5 mm to 12 mm

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Carbon Steel Pipe Fittings are Piping component that helps in Changes the direction of the flow such as elbows, tees. Changes the size of the pipe such as reducers, reducing tees. Connect different components such as couplings and stop the flows such as Caps.

There are different types of Carbon Steel pipe fitting used in piping. Pipe Fittings used in piping work are mainly Carbon Steel Elbow, Tee, Reducer, Union, Coupling, Cross, Cap, Swage Nipple, Plug, Bush, Expansion Joint, Adapters, Olet (Weldolet, Sockolet, Elbowlet, Thredolet, Nipolet, Letrolet, Swepolet), Steam Traps, Long Radius Bend, Flanges and Valve. 

Pipe Fittings are Piping component that helps in Changes the direction of the flow such as elbows, tees. Changes the size of the pipe such as reducers, reducing tees. Connect different components such as couplings and stop the flows such as Caps.

There are different types of pipe fitting used in piping. Pipe Fittings used in piping work are mainly Elbow, Tee, Reducer, Union, Coupling, Cross, Cap, Swage Nipple, Plug, Bush, Expansion Joint, Adapters, Olet (Weldolet, Sockolet, Elbowlet, Thredolet, Nipolet, Letrolet, Swepolet), Steam Traps, Long Radius Bend, Flanges and Valve.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

• Material: carbon steel
• Size: 1/8"~6"
• Shape: Equal, Reducing

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

When your projects require specialty flanges, Skyland Metal And Alloys Inc. can help.Skyland Metal And Alloys Present In Mumbai produces specialty flanges like spectacle flanges, expander flanges and lap-joint flanges, in addition to our standard and stock flanges.

A spectacle flange is a specialty flange made of two metal discs attached in the middle by a small section of steel. Spectable flanges get their name because they look like a pair of reading glasses, or spectacles. Spectacle flanges, also known as spectacle blind flanges, are most commonly used on piping systems that need to be separated regularly or where the flow through the systems is regularly stopped. One end of the spectacle flange is solid, while the other end has a hole in the center. The spectacle flange can be rotated to place either the solid or hollow end within the pipe system, thereby opening or closing the flow.

• Spectacle flanges require no welding for installation
• Spectacle flanges have a wide range of pressure tolerances
• Skyland Metal & Alloys Inc. Will manufacture Spectacle Flanges to your Specifications.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

SKYLAND METALAND ALLOYS INC. is an ISO 9001: 2015 / EEPC / OHSAS 18001: 2007 certified company that provides innovative, class, and service packed durable product line. We, at Skyland are devoted to offering services of the highest degree of quality and standard for challenging industries. Complete customer satisfaction is our priority.

We SKYLAND METALAND ALLOYS INC. are a manufacturer, trader, stockist, supplier and exporter of A860 WPHY 52 Pipe Fittings that are compliant to ASTM A860 specification, guidelines for butt weld pipe fittings made from Wrought High strength but low alloyed Stainless Steel, Seamless and EFW in nature. Our A860 WPHY 52 Pipe Fittings are a pre-requisite for the conveyance of gas and oil in the high-pressure gas and oil transportation systems.

Our ASTM A860 WPHY 52 Pipe Elbows, where the WPHY stands for Wrought Pipe High-Yield, are high in tensile strength, are impervious to general corrosion and aid the fertilizer production units.

Our 100% durable products are capable of undergoing customer specific customization.

• ASTM A860 WPHY GR 52 Pipe Fittings Specifications :
• ASTM A860 Applications Industry
• A860 WPHY 52 Pipe Fittings Main Export Countries
• Other Types Of CS Buttweld Pipe Fittings

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Our varied range of GI Tees are widely used in chemical, machinery, construction, petroleum and many other industries uses pipe fittings. These are available in various nominal sizes and specifications.

• Corrosion Resistant
• Accurate Dimension
• High-temperature resistant
• Easy Installation
• Durability

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Our company is a highly acclaimed Manufacturer, Supplier and Exporter of Carbon Steel Reducers in Mumbai, INDIA. These Carbon Steel Reducers are made of the best available material and manufactured using the best possible resources. We supply and export these Carbon Steel Reducers on a large scale owing to the high demand of the product. The Carbon Steel Reducers provided by our company find many uses in industrial areas.

Highlights:-

• Keeps big pipes and small pipes together
• Reduces noise and vibration at the same time
• Requires less installation space
• Absorbs pipe wall and fluid borne noise
• Less turbulence or material entrapment
• Reduces stress
• Protects against start-up surges
• Eliminates electrolysis
• Filled eccentric reducers are used on slurry and abrasive applications which in turn prevent the collection of material that can settle in the arches

Specifications:-

• Size : ½” NB -16” NB
• Material :WPB A234, or according to customers requirement
• Standard : ASME/ANSI B16.9, JIS
• Packaging : Wooden Case, Wooden Pallet, Plastic Bag Thick Plywood

Applications:-

• Oil
• Chemical Industry
• Water Conservancy
• Electric Power
• Boiler Machinery
• Metallurgy
• Sanitary Cconstruction etc.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

The ASTM standard covers alloy steel and stainless steel bolting. This material is often available in national coarse (UNC) thread pitches. ASTM A193 covers a number of other standard specifications.

Skyland Metal And Alloys Inc. is your source for ASTM A193 B7 Studs from 1/4” to 3” Diameter, and we stock all of the necessary ASTM A193 Grade B7 heavy hex nuts to complete your order. And when you need A193 Grade B7 Studs fast call Skyland Metal And Alloys Inc. And We will make it happen.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Spec Sheets

• Sizes : 1/2″ through 48″
• RADIUS :- 90′s, 45′s, Tees, Reducing 90′s, Concentric Reducers, Eccentric Reducers, Stub Ends,Crosses, Laterals, Return Bends
• A/SA 234 WPB

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P