Skyland Metal & Alloys Inc.
Charni Road, Mumbai, Maharashtra
GST No. 27BAZPB7846K1ZV
Call 08041949360 88% Response Rate
Tube Fittings
Tubing vs. Pipingand Hose
To begin, it may be important to distinguish some terminology. In industry, "tube" and "pipe" are nearly interchangeable terms. Bothdescribe long hollow cylinders of uniform material with a certain amount of rigidity and permanence.This is in contrast toa "hose", whichistypically more portable and flexible, and is made up of multiple layers of different materials which vary based on the application.
The difference between tubes and pipes is in how they are specified. Generally, tubes and their fittings aredefined with exactrather than nominal dimensions. In other words, a tube's outer diameter will often measure exactly 1.5 inchesif rated with a1.5"OD. This is not the case with pipes, where the actual dimensions areusually notthe nominal (specified) dimensions.
In addition, tubes arecommonlyassociated with structuralapplications where the defining sizing specification is outside diameter (OD). Pipes are more oftenspecifically vessels for fluid transport, where the defining specification for sizingis inside diameter (ID).
ApplicationsFitting construction and material specifications areapplication-dependent;consulting the fitting supplier is typically a wise route for optimizingcomponent selection. However,most tubefittings correspond to either hydraulic or pneumatic systems. The basic system type is the first step to determining the type of fittings right forthe application.
- Hydraulic applicationsinvolve the transfer of liquid fluids such as water and other chemical solvents. Hydraulic fittings must have seals which prevent the leakage of liquid andoften be resistant to rust or other possible chemical corrosion.
- Pneumatic applicationsinvolve the transfer of gases. Pneumatic fittings must have very tight seals to prevent gas leakage and must be resistant to chemical corrosion.
- Otherapplicationssuch as structural design also incorporate tube fittings. These fittingsmusthave strongphysical integritybuttypically do not requiresealing because they do not carry fluids.
Stainless Steel Ermeto Elbow
Minimum Order Quantity: 1 Piece
| Size | 3/4 inch, 1 inch, 1/4 inch |
| Connection | Male, Female |
| Elbow Bend Angle | 45 Degree, 90 Degree |
| Material Grade | Stainless Steel 304 / 316 |
| Country Of Origin | INDIAN |
| Application | Hydraulic Pipe |
| Brand | ERMETO |
Markets:
-
• Automotive
• Defence
• Energy
• Environment
• Industrial
• Infrastructure
• Machine Tools
• Materials Handling
• Mobile
• Oil and Gas
• Power Generation
• Process
• Transportation
• Water
-
Suitable for general hydraulic applications.
-
• High corrosion resistance: The Cr(VI)-free surface treatment gives an average corrosion resistance of more than 500 hours to white rust. This attribute extends the life cycle of the fittings.
• Stainless steel surface: Stainless steel fittings have a high corrosion resistance to aggressive media and environmental influences, also a higher temperature resistance, than steel. These features extend the range of applications.
• High pressure: These fittings have pressure ratings of up to 400 bar (S series) and 315 bar (L series). These features increase the range of applications.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
NPT Threaded Tee
Minimum Order Quantity: 1 Piece
| Material Grade | SS316, SS316L, ASTM A240, SS304L, SS304 |
| Connection | Male, Welded, Flange, Female |
| Shape | Tee |
| Brand | SMAI |
| Size | 2", 1/2", 3/4", 1", 3" |
| Application | Gas Pipe, Structure Pipe, Hydraulic Pipe |
| Usage/Application | Hydraulic Pipe |
| Place Of Origin | INDIAN |
| Thread Type | NPT |
| Form | Unequal Tee, Reducing Tee, Equal Tee |
| Condition | New |
| Material | Stainless Steel / Alloy Steel / Carbon Steel |
We Skyland Metal And Alloys Inc. are Manufactures of NPT Threaded tee in Stainless Steel , Carbon Steel ASTM A234 WPB, Alloy Steel ASTM A234 WP1, Alloy Steel ASTM A234 WP5, Alloy Steel ASTM A234 WP9, Alloy Steel ASTM A234 WP11, Alloy Steel ASTM A234 WP12, Alloy Steel ASTM A234 WP22, Alloy Steel A234 WP91, Stainless Steel ASTM A403 304, Stainless Steel ASTM A403 304L, Stainless Steel ASTM A403 304H, Stainless Steel ASTM A403 316, Stainless Steel ASTM A403 316L and Stainless Steel ASTM A403 316H. Adfit provides IBR Test Certificate Form III C with all IBR Elbow.
Size : 1/2"NB TO 4"NB
Schedule : SCH20, SCH30, SCH40, STD, SCH60, XS, SCH80, SCH120, SCH140, SCH160, XXS
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Double Ferrule Fittings
Minimum Order Quantity: 1 Piece
| Material Grade | ASTM A240, SS304L, SS316, SS304, SS316L |
| Size | 1/2" - 4", 3/4", 3", 1", 2", 1/2" |
| Thread Size | NPT / BSP |
| Application | Chemical Fertilizer Pipe, Hydraulic Pipe, Gas Pipe, Structure Pipe |
| Connection | Female, Male |
| Material | Stainless Steel |
| Brand | SKYLAND |
Double Ferrule Is Available is various Sizes,Materials and Configurations. Single Ferrule Fittings are widely used in Hydraulic and Pneumatic application in a Range Of Industries Such As Oil & Gas , Petro Chemicals , Natural gas , Fertilizers and Power-Generation Companies.
Our Double Ferrule Fittings are Generally Exported To Brazil,South-Africa,UAE,Italy,Indonesia,Malaysia,United-States,Mexico,Kuwait,Jordan,Dubai,Thailand(Bangkok),Iran,Germany,UK,Canada,Russia,Turkey,Australia,New-Zealand,Sri-Lanka,Kazakhistan,Saudi-Arabia,Oman and many more.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Instrumental Ferrule Fittings
Minimum Order Quantity: 1 Piece
| Thread Size | MALE / FEMALE |
| Steel Grade | SS304L, SS304, SS316L, SS316 |
| Connection | Welded, Female, Male |
| Material Grade | S.S. 304 / S.S. 316 |
| Application | Chemical Fertilizer Pipe |
| Size | more than 3inch |
| Brand | SKYLAND |
Offering Stainless Steel Ferrule Fittings:
Sourced from renowned manufacturers, our range of Stainless Steel Ferrule Fittings is highly durable. These are made using stainless steel and are offered in various forms as per the requirements of the clients. Our range can be availed in various grades at market leading rates. Duplex Ferrule Fittings we have been offering a wide range of Duplex Ferrule Fittings to our clients. These cater to the requirements of various industries and are known for dimensional accuracy, corrosion resistant and durability. Our range is available in various technical specifications as per the requirements of the clients. Alloy Steel Ferrule Fittings our range of Alloy Steel Ferrule Fittings is available in various specifications.
These are sourced from renowned manufacturers, who utilize high grade material for manufacturing these. Best known for high tensile strength and durability, our range is offered at market leading rates to our clients. Nickel Ferrule Fittings our range of Nickel Ferrule Fittings is procured from authentic vendors of the world. These are best in quality and conform to the international quality standards. Our range caters to the requirements of various industries and is known for optimum performance and high durability. Available in various grades, our rage can be further customized in terms of size, weight, thickness and dimension as per the requirements of the clients. Inconel & Monel Ferrule Fittings Hastelloy & Titanium Ferrule Fittings Alloy - 20 Ferrule Fittings Copper Alloy Ferrule Fittings.
Other Information
- Minimum Order Quantity:10 Piece(s)
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Double Ferrule Compression Fittings
Minimum Order Quantity: 1 Piece
| Connection | Female, Male, Welded |
| Size | 1/4 inch-1 inch, 3 inch-10 inch, 1 inch-2 inch, 2 inch-3 inch |
| Type | Adapters, Staplock Fittings, Swivel Nut, Ferrule |
| Application | Chemical Fertilizer Pipe, Gas Pipe, Hydraulic Pipe, Structure Pipe |
| Material Grade | S.S. 304 / 304L / 316 / 316L |
| Brand | Skyland |
| Thread | NPT BSP |
| Material | SS, MS, Brass |
Specifications:
- Material: Stainless Steel 304/316
- Shape: pipe
- Dimensions: dia3mm-150mm
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel 316 Tube Fittings
Minimum Order Quantity: 5 Piece
| Size | 3 inch |
| Application | Pneumatic Connections |
| Material | Stainless Steel |
| Brand | SKYLAND |
| Thread Size | NPT / BSP Threading |
| Material Grade | Stainless Steel |
Single Ferrule Is Available is various Sizes,Materials and Configurations. Single Ferrule Fittings are widely used in Hydraulic and Pneumatic application in a Range Of Industries Such As Oil & Gas,Petro Chemicals,Natural gas,Fertilizers and Power-Generation Companies.
Our Ferrule Fittings are Generally Exported To Brazil, South-Africa, UAE, Italy, Indonesia, Malaysia, United-States, Mexico, Kuwait, Jordan, Dubai, Thailand(Bangkok), Iran, Germany, UK, Canada, Russia, Turkey, Australia, New-Zealand, Sri-Lanka, Kazakhistan, Saudi-Arabia, Oman and many more.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: NHAVHA SHEVA
- Production Capacity: 1000000
- Delivery Time: 2 WEEKS
- Packaging Details: WOODEN BOX DAMAGE FREE PACKAGING
View Complete details
Stainless Steel Union Elbow
Minimum Order Quantity: 1 Piece
| Size | 1/2 inch, 3/4 inch, 1/4 inch, 2 inch, 1 inch, 3 inch |
| Usage/Application | Structure Pipe |
| Elbow Bend Angle | 45 Degree, 90 Degree, 60 Degree, 30 Degree |
| Application | Pneumatic Connections |
| Brand | Skyland |
| Material | Stainless Steel |
| Type | Union Elbow |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Compression Fittings
Minimum Order Quantity: 10 Piece
| Thread Size | BSP/NPT |
| Size | 2 inch, 3/4 inch, 1 inch, 1/2 inch |
| Connection | Female, Male |
| Application | Gas Pipe, Pneumatic Connections, Hydraulic Pipe, Chemical Fertilizer Pipe, Structure Pipe |
| Type | Ferrule |
| Color | Silver |
| Material | SS |
| Brand | SKYLAND |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
S.S. Bulk Head Elbow
Minimum Order Quantity: 5 Piece
| Color | SILVER |
| Elbow Bend Angle | 30 Degree, 45 Degree, 60 Degree, 90 Degree |
| Size | 1/2 inch - 4" |
| Shape | Equal |
| Material | Stainless Steel |
| Material Grade | 304, 304L, 316 / 316L |
| Brand | SKYLAND |
| Usage/Application | Pneumatic Connections |
| Application | Hydraulic Pipe |
SMAI brand all types of S.S.fittings as per the customers requirement and purpose. The key features of our swage lock fittings are :
Key Features
- High quality steel as per grade.
- Design for accurate dimension
- Pressure and quality tested.
- Economic and low maintenance.
- Materials : STAINLESS STEEL / 304 / 316 / 316 L / brass / or as per required.
- Pressure rating 0 to 630 bar (upto 10000 psi)
- Usage sugar automobile petrochemicals pharma, dairy, food, wine and brewery, chemical, textiles and process industries.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Double Ferrule Fittings
Minimum Order Quantity: 1 Piece
| Size | 1/4" - 4" |
| Application | Pneumatic Connections |
| Material | Stainless Steel |
| Thread Size | Standard |
| Brand | SKYLAND |
| Series | BSP / NPT / MALE / FEMALE |
Double ferrule compression tube fitting are a type of two-piece compression fitting that forces two metal ferrule against the tube as the fitting is tightened.
The reason so many businesses use our double ferrule compression fittings is because they are:
- Absolutely leak- and gas-tight
- Highly resistant to vibration, chemicals, corrosion, high pressures and high temperatures
- Easy to install, and easily disassembled
- Reusable multiple times
View Complete details
Stainless Steel Tri Clover Ferrule
Minimum Order Quantity: 100 Piece
| Size | 3 inch, 1 inch, 1/2 inch, 2 inch, 3/4 inch |
| Application | Structure Pipe, Pneumatic Connections, Gas Pipe, Chemical Fertilizer Pipe, Hydraulic Pipe |
| Condition | New |
| Grade | S.S. 316 / S.S. 304 |
| Material | Stainless Steel |
| Brand | SKYLAND |
Our standard range of clamp fittings covers sizes from 4mm to 12” (300mm) and encompasses the following internationally recognized standards:
Standards: ASME BPE-2002 BS 4825 Part 3 / ISO 2037 DIN 32676 DIN11864-3 3A Standard ISO 2852 and SMS 3017 SMS 3008 ISO 1127 Schedule Pipe Size BS 6362 Schedule Pipe Size ASTM A312
Schedule Pipe Materials: A wide range of non-standard material is also available for the ferrules, adapters and blanks, in addition to the standard AISI 316L stainless steel.
These include:
• AISI 316Ti Wn 1.4571
• AISI 316L (BN-2) Wn 1.4435 with low ferrite
• 6Mo materials & AL6-XN, 904L & 254 SMO
• Duplex alloys including SAF2507 UNS 32750
• Hastelloy®C22 and C276
• Nickel Alloys such as Monel 400
Titanium
• Nylon, ABS and Polypropylene
• Aluminium
Surface Finish: The standard internal surface finish for clamp ferrules is 0.8 - 1.0μM Ra, with enhanced finishes of 0.38 μM Ra or better available on request. Electra-polishing is also available to order.
Certification: Material traceability is available with EN 10204 3.1.B certificates on all clamp ferrules and blanks, while a certificate of conformity is offered for the clamps and seals.
Compatibility: Where the environment is deemed aggressive to either the seal or the clamp union, please provide details of the media and operating conditions including pressure and temperature. Our technical department will assist you in the selection of the most appropriate material and clamp system. See our technical information document for selection data relating to stainless steel and sealing materials
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Compression 90 Deg Elbow
Minimum Order Quantity: 5 Number
| Size | 1 inch, 3/4 inch, 2 inch, 1/2 inch, 3 inch |
| Brand | SKYLAND |
| Connection | Male |
| Elbow Bend Angle | 45 Degree, 90 Degree |
| Material Grade | 304, 304L, 316 / 316L |
| Country Of Origin | India |
| Application | Gas Pipe, Pneumatic Connections, Hydraulic Pipe |
| Condition | New |
1. Specification Summary
Body Material | Stainless Steel |
Cleaning Process | Standard Cleaning and Packaging (SC-10) |
Connection 1 Size | 1/2" |
Connection 1 Type | Compression fitting |
Connection 2 Size | 1/2 in |
Connection 2 Type | ISO Parallel Thread (ISO, SAE/MS Straight Thread optional) |
2. Details
Connection: 1/2" OD* 1/2" PPT
Easy to disconnect and retighten
Wide variety of materials and configurations
Wide variety of thread types optional
Live-loaded, two-ferrule design.
No torque is transmitted to tubing during installation.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Male Elbow
Minimum Order Quantity: 1 Number
| Connection | Male, Female |
| Size | 3/4 inch, 2 inch, 1 inch, 3 inch, 1/2 inch |
| Elbow Bend Angle | 90 Degree, 45 Degree, 60 Degree, 30 Degree |
| Material Grade | 304H, 304L, 304 |
| Condition | New |
| Country Of Origin | India |
| Thread Size | MALE |
| Nominal Size | Bhavesh bhansali |
| Application | Chemical Fertilizer Pipe, Pneumatic Connections, Structure Pipe, Gas Pipe, Hydraulic Pipe |
| Brand | SKYLAND |
We Offer an Assortment of S.S. Tube FIttings in a wide range of S.S. 304 Tube FIttings, S.S. 316 Tube Fittings , S.S. 310 Tube Fittings. These are available in different specification and thickness as per client requirements.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Brass Female Connector
Minimum Order Quantity: 1 Piece
| Connector Type | Brass Female connector |
| Material | brass |
| Color | yellow |
| Size | All Sizes |
| Place of Origin | INDIAN |
| Connection | Female |
| Condition | New |
| Brand | SKYLAND |
Specifications:
- Available Sizes:1/8" x 6 mm OD Tube to 1/4" x 10 mm OD Tube
- Material: Brass
- Type: Female Connector
- ISO 9001:2008 Certified Company
- Manufacturers Exporters of Brass Female Connector (P U Connector Female) in India
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Brass Male Connector
Minimum Order Quantity: 1 Number
| Size | All Sizes |
| Color | Golden |
| Material | Skyland |
| Connection | Male |
| Place of Origin | INDIAN |
| Condition | New |
| Brand | Skyland |
Our company SKYLAND METAL AND ALLOYS INC. is among the most sought after offering Brass Male Connector to the clients. Offered range is manufactured under the stern guidance of adroit professionals using superior-quality material in conformity. This product is stringently tested by quality examiners on several parameters. Brass Male Connector is widely appreciated and is customized as per the requirement of clients. Brass Male Connector is available in different specifications and can be customized on the specific demands of the clients.
Features:
- Long service life
- Robust construction
- Quality tested
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Union
Minimum Order Quantity: 1 Piece
| Size | 3/4 inch, 1/2 inch, 2 inch, 3 inch, 1 inch |
| Usage/Application | Pneumatic Connections |
| Application | Gas Pipe, Pneumatic Connections, Chemical Fertilizer Pipe, Structure Pipe, Hydraulic Pipe |
| Brand | SKYLAND |
| Color | Silver |
| Material | Stainless Steel |
| ORIGIN | INDIAN |
Features:
- high performance
- Easily installed
- Superior finish
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Tube Elbow
Minimum Order Quantity: 1 Piece
| Connection | Male, Female |
| Size | 3/4 inch, 1 inch, 3 inch, 1/2 inch, 2 inch |
| Elbow Bend Angle | 30 Degree, 90 Degree, 45 Degree |
| Application | Hydraulic Pipe, Chemical Fertilizer Pipe, Structure Pipe, Gas Pipe |
| Material | Stainless Steel |
| Material Grade | 304, 304L |
| Brand | SKYLAND METAL |
We Keep Bulk Stock of all sizes Of Male Elbows in 304 Grade , 316 Grades.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Production Capacity: 100000
- Delivery Time: immediate
View Complete details
Reducing Union Tube Fittings
Minimum Order Quantity: 1 Piece
| Application | Chemical Fertilizer Pipe, Hydraulic Pipe, Structure Pipe, Pneumatic Connections, Gas Pipe |
| Color | Silver |
| Material | Stainless Steel |
| Size | 3 inch |
| Brand | SKYLAND |
| GRADE | 316 |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel 316L Union Tee
Minimum Order Quantity: 1 Piece
| Size | 1 inch, 3 inch, 2 inch, 1/2 inch, 3/4 inch |
| Thread Size | NPT / BSP |
| End Type | Thread |
| Material | Stainless Steel |
| Condition | New |
| Color | Aluminium Finish |
| Application | Pneumatic Connections |
| Brand | SKYLAND |
We manufacture tube fittings from 1/8" OD to 2".
we manufacture in S.S. 202/304 / 304L / 316 / 316L / 321 / 347
For any queries , do feel free to communicate with us on call or email any day any time.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Male Branch Tee
Minimum Order Quantity: 1 Number
| Size | 3/4 inch, 1/2 inch, 1 inch, 3 inch, 2 inch |
| Material | Stainless Steel |
| Brand | SKYLAND |
| Material Grade | S.S. 316 |
| Form | Reducing Tee, Unequal Tee, Equal Tee |
| Place Of Origin | INDIAN |
| Connection Type | Male |
| Available Grades | 304 / 316 / 321 / 310 / 347 |
| Shape | Tee |
| Application | Structure Pipe |
| Thread Size | MALE |
| Condition | New |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Female Run Tee
Minimum Order Quantity: 1 Number
| Material | Stainless Steel |
| Application | Hydraulic Pipe, Chemical Fertilizer Pipe, Structure Pipe, Pneumatic Connections, Gas Pipe |
| Condition | New |
| Shape | Tee |
| Size | 3 inch |
| Grade | S.S. 316 |
| Brand | SKYLAND |
| Thread Size | Female |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel 316 Union Tee
Minimum Order Quantity: 1 Number
| Size | 3/4 inch, 2 inch, 1 inch, 3 inch, 1/2 inch |
| Application | Chemical Fertilizer Pipe, Hydraulic Pipe, Pneumatic Connections, Gas Pipe, Structure Pipe |
| Material | Stainless Steel |
| Thread Size | MALE / FEMALE |
| Condition | New |
| Material Grade | S.S. 316 |
| Place Of Origin | INDIAN |
| Form | Union Tee |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Monel Tube Fittings
Minimum Order Quantity: 1 Piece
| Grades | Monel K400 / Monel K500 |
| Grade | ASTM B66 UNS N04400 |
| Application | Hydraulic Pipe |
| Size | 1/2" - 3" |
| Material | Monel |
| Type | Tube Fittings |
| Brand | SKYLAND |
Features:
- Seamless finish
- Long lasting
- Easy to fit
List of countries/Where we export and supply from last 25 years –
Germany, Ghana, Greece, Greenland, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Ivory Coast, Jamaica, Jordan, Kenya, Kuwait, Lithuania, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritius, Mexico, Namibia, Nepal, Netherlands, New Zealand, Niger, Nigeria, Norfolk Island, Mariana Islands, Norway, Oman, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Saudi Arabia, Senegal, Serbia, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sweden, Switzerland, Tanzania, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States, Uruguay, Venezuela, Wallis and Futuna Islands, Yemen, Zambia, Zimbabwe.
We are also looking forward for a distributer from any of countries for our products , if any client is interested we can visit and complete the deal.
Albania, Europe, Algeria, Australasia, Argentina, South America, Australia, Austria, Bahrain, Middle East, Bangladesh, Asia, Belgium, Benin, Bermuda, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Bouvet Island, Brazil, Brunei, Bulgaria, Canada, North America, Cayman Islands, Chad, Chile, Christmas Island, Colombia, Congo, Cook Islands, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Ecuador, Egypt, El Salvador, Ethiopia, Falkland Islands, Faroe Islands, Fiji, Finland, France, Georgia.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Hexagon Bushing
Minimum Order Quantity: 1 Piece
| Length | 10mm - 100mm |
| Condition | New |
| Material Grade | S.S. 304 / S.S. 316 |
| Packaging Type | Box |
| Shape | Round, Hexagonal |
| Brand | SKYLAND |
| Material | Stainless Steel |
| Color | Silver |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
S.S. Male Run Tee
Minimum Order Quantity: 1 Piece
| Material | Stainless Steel |
| Thread Size | Male |
| Brand | SKYLAND |
| Condition | New |
| Size | 3/4 inch, 1 inch, 1/2 inch, 3 inch, 2 inch |
| Form | Reducing Tee, Unequal Tee, Equal Tee |
| Application | Pneumatic Connections |
| Type | Fitting Tee, Male Run Tee |
| Connection Type | Male |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
IBR Union
Minimum Order Quantity: 1 Piece
| Size | 3/4 inch, 2 inch, 3 inch, 1 inch, 1/2 inch |
| Application | Chemical Handling Pipe, Plumbing Pipe, Gas Pipe, Drinking Water Pipe, Structure Pipe |
| Usage/Application | Pneumatic Connections |
| Material | Stainless Steel / carbon steel / alloy steel |
| Thickness (mm) | Any |
| Brand | SKYLAND |
Class: 2000#, 3000#, 6000#, 9000#
Types: Socket Weld (S/W) Screwed (SCRD) – BSP, NPT, BSPT
Material:
Stainless Steel – ASTM A182 F 304 / 304L / 316 / 16L/ 310
Carbon Steel – ASTM A105, A694 Gr. F42 / 46 / 52 / 56 / 60 / 65 / 70
Alloy Steel – ASTM A182 F1 / F5 / F9 / F11 / F22 / F91
Test Certificate: IBR FORM IIIC
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
Stainless Steel Female Branch Tee
Minimum Order Quantity: 1 Piece
| Brand | SKYLAND |
| Size | 3/4 inch |
| Application | Gas Pipe |
| Thread Size | BSP/NPT |
| Material Grade | S.S. 304 / S.S. 316 |
| Color | Silver |
| Material | Stainless Steel |
| Condition | New |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
View Complete details
EXPLORE MORE CATEGORIES
Ratings & Reviews
3.7/5
Rated by 35 Users
- 5★18
- 4★4
- 3★5
- 2★1
- 1★7